MSDS

301144, 2122 EPOXY PUTTY,
HARDENER COMPONENT
MATERIAL SAFETY DATA SHEET
Page 2 of 7
Rev 6
26/09/13
Hazardous ingredients:
2,4,6-TRIS (DIMETHYLAMINOMETHYL) PHENOL
CAS: 90-72-2 EINECS: 202-013-9 1-5%
[Xn];R22 [Xi];R36/38
General advice
Show this safety data sheet to medical personnel. Wash contaminated clothing before re-use.
Inhalation:
Move to fresh air in case of accidental inhalation of fumes from overheating or combustion. Lie down in
the recovery position, cover and keep warm.
Skin contact:
Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes.
Eye contact
Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue
flushing for at least 15 minutes. Keep eyes wide open while rinsing. If eye irritation persists, consult a
specialist.
Ingestion:
Do not induce vomiting. Clean mouth with water and afterwards drink plenty of water. If a person vomits
when lying on his back, place him in the recovery position
Suitable extinguishing media
The product is not flammable. Use extinguishing measures that are appropriate to local circumstances
and the surrounding environment.
Specific hazards arising from the substance or mixture
In the event of fire and/or explosion do not breathe fumes. Thermal decomposition can lead to release of
irritating gases and vapors.
Advice for firefighters
In the event of fire and/or explosion do not breathe fumes. In the event of fire, wear self-contained
breathing apparatus.
3. COMPOSITION / INFORMATION ON INGREDIENTS
4. FIRST AID MEASURES
5. FIRE-FIGHTINGMEASURES