Cut Sheet

ManualsBrandsAppleton ManualsAluminum CoversConduit Body Cover, Screw-On/Flat Type, Diameter 1/2", Form 85, Cast Aluminum

Table Of Contents

Applications

• Serve as pulling ttings.

• Make bends in conduit system.

• Provide openings for splicing.

• Connect and change direction of conduit runs.

• Allow connections for branch runs.

• Permit access to conductors for maintenance.

Features

• Smooth, rounded integral bushings in hubs protect conductor

insulation.

• Accurately tapped, tapered threads for tight, rigid joints and

excellent ground continuity.

• Form 35 malleable iron Unilets: high tensile strength and

ductility. High corrosion-resistance, high impact and shock

resistance.

• Exclusive built-in easy-pulling rollers in type C (1-1/4” thru 4”)

and type LB (1-1/4” thru 4”): eliminate damage when cable is

pulled through hubs.

• Sizes with at-back design ideal where tting is mounted at

against surface.

• 1/2" to 3" blank covers are domed for extra wiring space.

Standard Materials

• Bodies: malleable iron

• Blank covers: malleable iron, steel or aluminum

• Cover screws: stainless steel

• Gaskets: neoprene or composition ber

Standard Finishes

• Malleable iron bodies and covers: triple-coat — (1) zinc

electroplate, (2) chromate, and (3) epoxy powder coat

• Steel covers: zinc electroplate

Certifications and Compliances

• UL Standards: 514A, 514B

• UL Listed: E2527

• CSA Standard: C22.2 No. 18.3

• CSA Certied: 065183

• NEMA Standard: FB-1

Summary of content (5 pages)

PAGE 1
Form 35® Malleable Iron Unilet® Conduit Outlet Bodies For use with Rigid Steel, Rigid Aluminum and IMC Conduit. Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors for maintenance. Fittings • • • • • • Features Fittings: Conduit Bodies • Smooth, rounded integral bushings in hubs protect conductor insulation.
PAGE 2
Form 35® Malleable Iron Unilet® Conduit Outlet Bodies For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
PAGE 3
Form 35® Malleable Iron Unilet® Conduit Outlet Bodies and Wiring Capacity Compression Type for use with Threadless Rigid Metal Conduit. Compression Type — For use with Threadless Rigid Metal Conduit – Flat Back Design Hub Size (Inches) LB LRL * T Fittings LB50N-M LRL50N-M T50N-M 3/4 LB75N-M LRL75N-M T75N-M 1 LB100N-M LRL100N-M T100N-M Fittings: Conduit Bodies 1/2 Wiring Capacity: Combine Body and Cover Capacities for Total Usable Capacity per NEC 314.
PAGE 4
Covers and Gaskets for Form 35® Unilet® Conduit Outlet Bodies Covers Furnished with Stainless Steel Fastening Screws. Covers and Gaskets * Blank Stamped Steel Blank Cast Malleable Domed: 1/2” - 3” Flat: 1/2” - 2” Flat: 3-1/2” - 6” Domed: 2-1/2” - 4” Neoprene Composition Fiber Fittings: Conduit Bodies Fittings Body Size (Inches) Tear out inner section to convert to “open type” gasket.
PAGE 5
Form 35® Malleable Iron Unilet® Conduit Outlet Bodies Dimensions Threaded Type for use with Rigid Metal Conduit and IMC; Compression Type for use with Threadless Rigid Metal Conduit. Threaded Type (Inches/Millimeters) Fittings Hub Size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 3-1/2 4 5 6 A 3.94/ 100.1 4.63/ 117.6 5.38/ 136.7 7.19/ 182.6 7.19/ 182.6 9.50/ 241.3 12.25/ 311.2 12.25/ 311.2 14.88/ 378.0 14.88/ 378.0 18.25/ 463.6 23.00/ 584.2 B 1.31/ 33.3 1.56/ 39.6 1.81/ 46.0 2.50/ 63.5 2.50/ 63.5 3.13/ 79.5 4.