Cut Sheet

NEC:
Class I, Division 1 and 2, Groups B, C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
Description Catalog Number
Nameplates for Rectangular Push Buttons
Blank SNP-B-Q Off SNP-OFF-Q
Forward SNP-FWD-Q On SNP-ON-Q
Jog SNP-JOG-Q Reverse SNP-REV-Q
Run SNP-RUN-Q Open SNP-OPEN-Q
SNP-OFF-Q
Stop SNP-SP-Q Close SNP-CLOSE-Q
Start SNP-ST-Q Up SNP-UP-Q
Down SNP-DOWN-Q Test SNP-TEST-Q
Fast SNP-FAST-Q Low SNP-LOW-Q
Slow SNP-SLOW-Q High SNP-HIGH-Q
Raise SNP-RAISE-Q
SNP-ON-Q
Lower SNP-LOWER-Q
Reset SNP-RESET-Q
Push Button Replacement Locking Guards — Glass Reinforced Polypropylene — Gasketed
Maintained Switch
Guard
Has hole for 1/4” hasp.
Single Guard (Maintained Switch) SMPB-LG
Single Guard NPB-LG1
Single Guard
Double Guard NPB-LG2
Single Guard (No Lockout Holes) NPB-LG1-LL
Double Guard (No Lockout Holes) NPB-LG2-LL
Double Guard
Push Button Securing Rod with Chain — Stainless Steel
For use with Single Guard Only NBL-SR
Mushroom Button with Weather Boot for Use with Momentary Contact — Gasketed
Black NMRB-BL
Green NMRB-GR
Red NMRB-RE
Mushroom Button
For Use with Maintained Contact — Solid-Colored Nonmetallic Button
Red NMRBM-RE
Nameplates For Momentary and Maintained Mushroom Head Push Button
Start MNPSTQ
Stop MNPSPQ
Emergency Stop MNPESTPQ
MNPESTPQ
Blank MNPBQ
 Suitable for Class I, Group B when installed in an enclosure rated for Class I, Group B.
Controls
NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION CONTROL STATIONS AND SWITCHES
Visit our website at www.appletonelec.com or contact us at [phone].
© May 2014
315
EFD/EFDB Push Button Accessories and Parts