Cut Sheet

ManualsBrandsAppleton ManualsPin & Sleeve ReceptaclesAsr 60a Fused Interlock

Table Of Contents

NEMA 4X, 12

Plugs and Receptacles

Plugs and RecePtacles: ORdinaRy lOcatiOn

Visit our website at www.appletonelec.com or contact us at (800) 621-1506.

808

ASR Nonmetallic Interlocked Receptacle

With Enclosed Disconnect Switch

600 Vac, 30 and 60 Amp, Fused and Non-Fused

Applications

• For use where an interlocked disconnect switch is desired

to control a Powertite

receptacle and removal of the plug.

Interlock prohibits plug insertion or removal under load. Plug is

secured in place by interlock and cannot be withdrawn unless

interlock switch is actuated.

• Designed for use in hose-down areas, damp or corrosive

locations, raintight or watertight non-hazardous applications.

• For heavy duty applications where a service outlet is required for

portable or xed electrical equipment such as:

— Welders

— Generators

— Compressors

— Infrared ovens

— Batch feeders

— Conveyors

— Truck terminals

— Marine docks

• Ideally suited for use in industrial plant applications such as:

— Automotive and steel processing plants

— Pulp and paper processing plants

— Milk processing plants and creameries

— Fabrication yards and shipyards

— Refrigerated truck terminals

• Suitable for use as a motor disconnect.

Features

• Moveable mounting feet allow for installation on irregular

surfaces for easy installation.

• Internal mounting tubes where mounting area is limited.

• Hidden hinge system eliminates sanitation concerns.

• The switch is the latest in technology utilizing self-cleaning

contacts and driven by a solid bridge bar to prevent single

phasing of motors. The quick make/break action provides long

electrical life.

• Meets OSHA requirements for lockout/tagout (Reg. 1910.147).

Switch can be locked in the OFF position.

• Utilizes Style 2 (shell and extra pole) grounding and 3-wire,

4-pole receptacle wiring.

• Available in fused or non-fused using the same compact

enclosure.

• Class J fusing standard on fusible units (100 kAIC short circuit

protection at the load source).

• Removable fuse holders allow for installation and replacement

of fuse away from interior of unit (fuses not supplied).

• Supplied conduit hub can be installed on top or bottom of the

enclosure. Hub sizes: 1.0” 30 Amp, 1.25” 60 Amp.

• Dead front design: Receptacle is not energized until plug is fully

inserted and switch is engaged.

• IP66 Suitable.

• UL04 – 5V Flame Rating.

Standard Materials

• Enclosure: VALOX

* thermoplastic polyester with seamless

form in place gasket

• Screws: stainless steel screws for outstanding corrosion

resistance

• Materials are UV stabilized

Options

• Reverse Service is useful where a “hot” plug feeds a dead

receptacle. Reverse service is often used for generator

applications where the receptacle houses a dead plug

interior. Plug houses an energized receptacle interior, which

has recessed male contacts to reduce danger of accidental

touching. 30 and 60 Amp units can be easily converted to

reverse service in the eld when matching plug and receptacle

are ordered. Add sufx -RS to receptacle or connector.

Certifications and Compliances

• UL Standard: UL 98, UL 1682, and UL 1686

• UL Listed: E304212

• CSA Standard: CSA 22.2 No. 4, C22.2 No. 182.1

• cUL Listed: E160652

Summary of content (3 pages)

PAGE 1
ASR Nonmetallic Interlocked Receptacle With Enclosed Disconnect Switch 600 Vac, 30 and 60 Amp, Fused and Non-Fused NEMA 4X, 12 Plugs and Receptacles: Ordinary Location Plugs and Receptacles Applications • For use where an interlocked disconnect switch is desired to control a Powertite® receptacle and removal of the plug. Interlock prohibits plug insertion or removal under load. Plug is secured in place by interlock and cannot be withdrawn unless interlock switch is actuated.
PAGE 2
ASR Nonmetallic Interlocked Receptacle Ordering Information, Replacement Parts With Enclosed Disconnect Switch 600 Vac, 30 and 60 Amp, Fused and Non-Fused NEMA 4X, 12 Amp Type Config.
PAGE 3
ASR Nonmetallic Interlocked Receptacle Dimensions With Enclosed Disconnect Switch 600 Vac, 30 and 60 Amp, Fused and Non-Fused Plugs and Receptacles Dimensions 30 Amp B C F D D G A G E E A Plugs and Receptacles: Ordinary Location 60 Amp B C F NOTE: Units are provided with external mounting feet. Use is optional. If used overall mounting dimensions will change. H H Dimensions in Inches/Millimeters D E Amp A B C F G H 30 11.50/292.1 7.0/177.8 6.34/161.0 13.00/330.2 0.18/4.57 7.