Cut Sheet

Rigid Metal Conduit, IMC or EMT “K-Clamps”
Catalog
Number
Trade Size
(Inches)
Weight Lbs./Kgs.
Per 100
Right Angle Type — Hot Dip/Mechanically Galvanized — For Rigid, IMC, EMT
Right Angle Type
PC-50RA 1/2 37.00/16.78
PC-75RA 3/4 40.00/18.14
PC-100RA 1 42.00/19.05
PC-125RA 1-1/4 49.00/22.23
PC-150RA 1-1/2 54.00/24.49
PC-200RA 2 71.00/32.21
PC-250RA 2-1/2 95.00/43.09
PC-300RA 3 107.00/48.53
PC-350RA 3-1/2 120.00/54.43
PC-400RA 4 131.00/59.42
PC-500RA
†
5 160.00/72.57
PC-600RA
†
6 195.00/88.45
Parallel Type — Hot Dip/Mechanically Galvanized — For Rigid, IMC, EMT
Parallel Type
PC-50PAR 1/2 50.00/22.68
PC-75PAR 3/4 53.00/24.04
PC-100PAR 1 60.00/27.22
PC-125PAR 1-1/4 70.00/31.75
PC-150PAR 1-1/2 82.00/37.19
PC-200PAR 2 132.00/59.87
PC-250PAR 2-1/2 192.00/87.09
PC-300PAR 3 194.00/88.00
PC-350PAR 3-1/2 216.00/97.98
PC-400PAR 4 232.00/105.23
Edge Type — Hot Dip/Mechanically Galvanized — For Rigid Conduit Only
Edge Type
PC-50ET 1/2 63.00/28.58
PC-75ET 3/4 69.00/31.30
PC-100ET 1 82.00/37.19
PC-125ET 1-1/4 95.00/43.09
PC-150ET 1-1/2 108.00/49.00
PC-200ET 2 121.00/54.88
PC-250ET 2-1/2 153.00/69.40
PC-300ET 3 214.00/97.07
† Not CSA Certified.
Applications
• Designed to secure rigid metal conduit, IMC or EMT across,
parallel or perpendicular to beam, channel and angle supports.
Features
• Easily installs.
• Capable of withstanding heavy loads.
Material/Finish
• Castings: malleable iron/hot dip galvanized
• Hardware: steel/mechanically galvanized
Certifications and Compliances
• CSA Standard: C22.2 No. 18.4
• CSA Certifi ed: 065178
Commercial Products
COMMERCIAL PRODUCTS: RIGID, IMC AND EMT CLAMPS AND HANGERS
Visit our website at www.appletonelec.com or contact us at [phone].
© September 2010
1648