Cut Sheet

A-51
®
Incandescent Factory Sealed Luminaires
For Group C and D Locations. Explosionproof
Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit.
Class I, Division 1 and 2, Groups C, D
Class II, Division 1 and 2, Groups E, F, G
Class III
Type
Hub Size
(Inches)
Catalog
Number ➋
60-100 W (AAU-1N)
A-21
1/2 ALB1050
3/4 ALB1075
1 ALB10100
150-300 W (AAU-15N)
A-23 PS-25
1/2 ALB1550
3/4 ALB1575
1 ALB15100
200-300 W (AAU-2NS)
PS-30
1/2 ALB2050
3/4 ALB2075
1 ALB20100
15° Short Bracket — Two Hubs, One Close-up Plug
60-100 W (AAU-1N)
A-21
1/2 ASB1050
3/4 ASB1075
150-300 W (AAU-15N)
A-23 PS-25
1/2 ASB1550
3/4 ASB1575
200-300 W (AAU-2NS)
PS-30
1/2 ASB2050
3/4 ASB2075
Three-Way Exit Sign
Epoxy enameled steel – 6”/152.4 mm-high red lettering 60-200 W
(Mounts to AAU-1N or AAU-15N fi xture units in place of guard)
CJEXRN
Single-Sided Exit Sign
Epoxy enameled steel – 6”/152.4 mm-high red lettering 60-200 W
(Mounts to AAU-1N or AAU-15N fi xture units in place of guard)
AEXR-15R
Guard — Add suffix to fixture catalog number
Guard -G
➊ See A-51
®
Incandescent Factory Sealed Luminaire Classified Area Suitability page for suitability of specific fixtures.
Lighting
LIGHTING: EXPLOSIONPROOF — AREA — INCANDESCENT
Visit our website at www.appletonelec.com or contact us at [phone].
© November 2011
1278