Cut Sheet
Table Of Contents
WATERTIGHT PIN
AND SLEEVE
ese plugs and receptacles
are the standard for non-
metallic industrial pin and
sleeve devices. e housings
are constructed of nylon
and high-impact PBT for
durability. e entire line
is color-coded for quick and
easy identi cation of voltage
requirements. Spring-loaded
lids and gaskets ensure
watertightness in heavy
hosedown situations.
INTRAGROUND
®
N1 AND
N2 SERIES RECEPTACLES
ese non-metallic receptacles
stand up to extremely corrosive
locations like o shore oil rigs.
e N1 Series is ideally suited
for Division 1 applications,
and it will stay dry internally
under the toughest conditions.
e N2 Series is for Division
2 environments and is factory
sealed so no external seals
are required.
CPS RECEPTACLES
e quick Make/Break feature
of these receptacles reduces the
potential for arcing. Deeply
recessed contacts decrease the
danger of accidental touching
and safely con ne any possible
arcing to the interior of the unit.
U-LINE
®
/U-LINE
®
GFCI SERIES
Bringing power to portable
electrical devices should not
bring hazards along with it.
With U-Line
®
receptacles,
you have safety in design and
convenience in function. e
factory sealed switched receptacle
is explosionproof and designed
to keep out moisture and dust.
A simple twist of the plug produces
an audible “click,” indicating that
the receptacle is energized and
the plug cannot be pulled out
accidentally. A spring-loaded cap
adds additional protection when
the plug is disengaged. When
operating portable electrically-
operated devices in wet conditions,
rely on the U-Line
®
GFCI to
meet all of the UL and CSA
requirements for ground fault
protection in hazardous conditions.
W N4X
Cl.I
Div.2
Cl.I
Div.1
N3XW
Cl.I
Div.1
WG N3X N4X