Cut Sheet

Catalog Number Description Box Quantity Catalog Number Description Box Quantity
Locknuts – Nickel Plated Brass
• Brass locknuts are recommended for use in securing brass cable glands to a gland plate or into equipment.
20LN5 M20 100 050NPTLN5 050NPT 100
25LN5 M25 100 075NPTLN5 075NPT 100
32LN5 M32 50 100NPTLN5 100NPT 50
40LN5 M40 50 125NPTLN5 125NPT 50
50LN5 M50 10 150NPTLN5 150NPT 10
63LN5 M63 5 200NPTLN5 200NPT 5
75LN5 M75 5 250NPTLN5 250NPT 5
90LN5 M90 1 300NPTLN5 300NPT 1
350NPTLN5 350NPT 1
Earth Tags – Pear (Nickel Plated Brass)
• Installed between the cable gland and equipment. Provide an earth bond connection as specied in BS 6121 : Part 5 : 1993.
20ET5 M20 100 050NPTET5 050NPT 100
25ET5 M25 100 075NPTET5 075NPT 100
32ET5 M32 50 100NPTET5 100NPT 50
40ET5 M40 50 125NPTET5 125NPT 50
50ET5 M50 10 150NPTET5 150NPT 10
63ET5 M63 5 200NPTET5 200NPT 5
75ET5 M75 5 250NPTET5 250NPT 5
90ET5 M90 1 300NPTET5 300NPT 1
350NPTET5 350NPT 1
Entry Thread Seals – Sealing (IP) Washers
• It is essential to maintain the integrity of the degree of IP protection for which explosionproof equipment have been rated. The need for a
sealing washer will depend on the IP rating, code of protection and the type of entry holes available within that equipment (e.g. for Ex e
apparatus or terminal boxes which are permitted to have untapped through clearance holes it is necessary to t a sealing washer to ensure
that the minimum IP54 requirement is met). Other equipment with tapped entry holes may not require a sealing washer to maintain the
rated integrity of the instal lation.
• Entry thread sealing washers are produced in 2mm thick white nylon as standard which are recommended and meet the specied
requirements of Shell’s Offshore operations.
• To verify the effectiveness of the nylon entry sealing washers, independent 3rd party tests to BS EN 60529:1992 have been conducted on
certain cable gland types at IP66, IP67 and IP68 levels of protection. Documentation of these high standard tests is available upon request.
20ETS2 M20 1000 050NPTETS 050NPT 100
25ETS2 M25 1000 075NPTETS 075NPT 100
32ETS2 M32 500 100NPTETS 100NPT 50
40ETS2 M40 200 125NPTETS 125NPT 50
50ETS2 M50 200 150NPTETS 150NPT 10
63ETS2 M63 100 200NPTETS 200NPT 5
75ETS2 M75 100 250NPTETS 250NPT 5
90ETS2 M90 10 300NPTETS 300NPT 1
350NPTETS 350NPT 1
Serrated Washers – Stainless Steel
• Available in plated steel or stainless steel as standard, these “shake-proof” serrated washers tted internally to the equipment and before a
locknut act as an anti-vibration device to prevent the gland and locknut arrangement from inadvertently loosening in service.
20SW4 M20 500 050NPTSW4 050NPT 100
25SW4 M25 500 075NPTSW4 075NPT 100
32SW4 M32 200 100NPTSW4 100NPT 50
40SW4 M40 100 125NPTSW4 125NPT 50
50SW4 M50 100 150SPTNW4 150NPT 10
63SW4 M63 50 200NPTSW4 200NPT 5
75SW4 M75 50 250NPTSW4 250NPT 5
90SW4 M90 10 300NPTSW4 300NPT 1
350NPTSW4 350NPT 1
PVC Shrouds
Push on shrouds are used to minimise the risk of dirt or foreign substances gathering on the cable gland body, and/or point of
cable to gland interface. Standard shrouds are produced in black PVC.
Refer to the specific cable gland page for the PVC Shroud catalog number that is appropriate for use with that specific style cable
gland.
Fittings
Fittings: CaBle glands
Visit our website at www.appletonelec.com or contact us at [phone].
© September 2010
157
Cable Gland Accessories and Tools