Installation Instructions

CAUTION! Working above grade is inherently dangerous, be sure that proper fall
protection measures are in place. When working with power tools and sheet metal,
gloves and eye protection are absolutely required.
X 8
2
3
4
8"
8"
1
Remove old vents. It may be necessary to “square up”
the hole to 8" x 8" maximum.
Fasten with eight 1 1/2" long roofing nails using the
pre-punched holes provided.
Nails must be installed in all 8 pre-punched locations.
Place a Kwik-Plug™ centered in the vent hole opening.
Use Kwik-Plug™ to repair
any roof deck damage
under 8 inches square.
The Repair that Restores
Roof Integrity
800-558-3414 • appletonsupply.com
RESTORE ROOF INTEGRITY
™