Safety Data Sheets (SDS)

California Steel Industries, Inc.
Effective Date: January 24, 2014
Page 9 of 9
GALVANIZED STEEL
NOTIFICATION PURSUANT TO EPCRA, 40 CFR PART 372.45
This material contains toxic chemicals which are subject to the reporting requirements of Section 313 of Title III of
the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR part 372. The following chemicals
contained in this material are subject to the reporting requirements of Section 313:
Chemical
CAS Number
Typical Weight Percentage
Aluminum
7429-90-5
0.08 max
Chromium Alloy
7440-47-3
0.10 max
Copper
7440-50-8
0.25 max
Lead
7439-92-1
0.001–0.015
Manganese
7439-96-5
0.10-1.35
Nickel
7440-02-0
0.10 max
Phosphorus
7723-14-0
0.025 max
Vanadium*
7440-62-2
0.04 max
Zinc (from coating
7440-66-6
>99
*Except when used in alloys
16. Documentary Information and DISCLAIMER OF EXPRESSED AND IMPLIED WARRANTIES
Issue Date: November 18, 2013
Previous Issue Date: December 5, 2012
Reason for Revision: Updated to GHS
This product is typically coated with an oil to prevent oxidation. Hazards associated with exposure to the oil
are not covered on this SDS. An accompanying SDS specific to the hazards associated with the oil must be
used with this SDS. If the oil SDS is not included with this SDS, contact California Steel Industries, Inc. for a
copy of the oil SDS.
The information in this document is believed to be correct as of the date issued. HOWEVER, NO WARRANTY
OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY OTHER WARRANTY IS
EXPRESSED OR IS TO BE IMPLIED REGARDING THE ACCURACY OR COMPLETENESS OF THIS
INFORMATION, THE RESULTS TO BE OBTAINED FROM THE USE OF THIS INFORMATION OR THE
PRODUCT, THE SAFETY OF THIS PRODUCT, OR THE HAZARDS RELATED TO ITS USE. This information
and product are furnished on the condition that the person receiving them shall make his own determination as
to the suitability of the product for this particular purpose and on the condition that he assumes the risk of his
use thereof.