Setup guide

Xserve RAID Take Apart - 17
Removing Xserve RAID from the Rack
Removing Xserve RAID from
the Rack
You must remove Xserve RAID from its rack to access all parts except the hard drive,
power supply, cooling module, controller module, processor, memory, and backup battery.
Important: Due to the weight of the system, do not attempt to lift or move the system
without help from another person.
Tools
The only tool required for this procedure is a Phillips screwdriver.
Preliminary Steps
See “Before Opening Xserve RAID” at the beginning of this chapter.
Procedure
1. Remove the two screws that secure the system to the front rail of the rack.