System information
Configuring an Xserve RAID System
9
2
Start RAID Admin on a computer that is on the same subnet as the system and click Add
System.
3
In the Add window, select the system you want from the list or type the IP address of the
system in the Address field.
4
Type the Monitoring Password.
Monitoring access allows you to monitor a system but not make changes. When you want to
create an array or make other changes, the software asks you to enter the management
password.
Note:
The default monitoring password is “public.” The default management password
is “private.”
5
Click Add.
6
Select the system in the list to display its settings and information in the monitoring tabs.
Entering Basic Settings for an Xserve RAID System
You can enter or change a number of settings for the Xserve RAID system. These include
m
System name
m
Location of the system and key contact
m
Management or monitoring password
m
System time synchronization with the monitoring computer