Instruction Manual

4 Open the Drive Setup program.
You use the Drive Setup program to update your hard disk.
5 In the list of drives, click your startup disk.
6 Pull down the Functions menu and choose Update Driver.
7 When the update process is finished, quit Drive Setup.
8 Shut down your server.
9 If you are installing system software on your startup disk, start up your
server from the Workgroup Server Software CD-ROM disc.
The Installer’s Welcome screen may appear or you may have to double-
click the System Software Installer icon to open the Installer program.
10 Click OK.
The Easy Install dialog box appears.
66
If you need to install
on a different disk,
click this button.
Disk on which
system software
will be installed.
For a clean
installation,
DO NOT click
the Install button.