Instruction Manual

1 If the disk that you need to initialize is your startup disk, start up your
server from the Workgroup Server Software CD-ROM disc.
For details, see “Starting Up From a CD-ROM Disc” earlier in this chapter.
2 Open the Drive Setup icon.
The Drive Setup program resides in the Utilities folder in the Apple Extras
folder on your startup disk and on the Workgroup Server Software CD-ROM
disc.
3 In the list of drives, click the disk you want to initialize.
4 Click Initialize to initialize the hard disk.
5 Click Quit when you see a message reporting that initialization was
successful.
If a message reports that initialization failed, try again. If initialization fails
a second time, take the disk to your Apple-authorized service provider for
repair.
61