Instruction Manual

TCP/IP control panel user modes

In Basic mode, the TCP/IP control panel looks like this:

In Basic mode, the TCP/IP control panel allows you to do the following (if

the settings are not locked):

m Use the “Connect via” pop-up menu to change the default port for

TCP/IP.

m Use the Configure pop-up menu to select a configuration method.

m Enter the server’s IP address (if you are configuring manually).

m Enter the server’s subnet mask number.

m Enter the IP address of one or more name servers.

m Enter the names of domains that are to be searched in order to locate a

remote host.

m Enable the IEEE 802.3 variant of Ethernet (this option is available only

when Ethernet is selected in the “Connect via” pop-up menu).