Specifications

Connecting other devices
If you want to connect other devices to your server, such as an external hard
disk or a printer, follow the instructions in Chapter 3.
Plugging in the server
To plug in the server:
1 Plug the socket end of the server’s power cord into the recessed power plug (marked
with the symbol ≤ ) on the back of the server.
2 Plug the other end of the power cord into a three-hole grounded outlet or power strip.
Choose a power outlet to which you have easy access.
Power cord socket
Power cord plug
WARNING This equipment is intended to be electrically grounded. Your
server is equipped with a three-wire grounding plug—a plug that has a
third (grounding) pin. This plug will fit only a grounded AC outlet. This
is a safety feature. If you are unable to insert the plug into the outlet,
contact a licensed electrician to replace the outlet with a properly
grounded outlet. Do not defeat the purpose of the grounding plug!
Plugging in the server 9