Congratulations, you and your iMac were made for each other.
Say hello to your iMac. www.apple.com/imac Built-in FaceTime HD camera Make video calls to a Mac, iPhone 4, or new iPod touch with FaceTime for Mac. Mac Help camera Finder Browse your files like you browse your music with Cover Flow. Mac Help finder Mail Manage all your email accounts in one place. iCal and Address Book Keep your schedule and your contacts in sync.
Mac OS X Snow Leopard www.apple.com/macosx Time Machine Automatically back up and restore your files. Mac Help time machine Quick Look Instantly preview your files. Spotlight Find anything on your Mac. Mac Help quick look Mac Help spotlight iMovie Make a greatlooking movie in minutes. GarageBand Create a greatsounding song with ease. iMovie Help movie GarageBand Help record iLife ’11 www.apple.com/ilife iPhoto Turn your photos into something amazing.
Contents Chapter 1: Ready, Set Up, Go 9 What’s in the Box 10 Setting Up Your iMac 15 Putting Your iMac to Sleep or Shutting It Down Chapter 2: Life with Your iMac 18 20 22 24 26 28 30 32 Basic Features of Your iMac Ports on Your iMac Other Components of Your iMac Features of the Apple Wireless Keyboard and Magic Mouse Using the Apple Wireless Keyboard Using the Apple Magic Mouse Using the Apple Remote Getting Answers Chapter 3: Boost Your Memory 37 Installing Memory 42 Making Sure Your iMac Recognizes th
Chapter 4: Problem, Meet Solution 45 47 49 50 52 53 54 55 56 57 60 Problems That Prevent You from Using Your iMac Replacing the Batteries Using Apple Hardware Test Problems with Your Internet Connection Problems with AirPort Wireless Communication Keeping Your Software Up to Date Reinstalling the Software That Came with Your iMac Using Disk Utility Other Problems Learning More, Service, and Support Locating Your Product Serial Number Chapter 5: Last, but Not Least 62 66 67 68 70 Important Safety Informat
1 Ready, Set Up, Go www.apple.
Your iMac is designed so that you can easily set it up and start using it right away. If you’ve never used an iMac or are new to Mac computers, read this chapter for instructions about getting started. Important: Read all the setup instructions in this chapter and the safety information starting on page 62 before you plug your iMac into a power outlet. If you are an experienced user, you may already know enough to get started.
What’s in the Box Your iMac comes with an Apple Wireless Keyboard, a wireless Apple Magic Mouse, and an AC power cord. If you ordered an Apple Remote, it’s also in the box.
Setting Up Your iMac Follow these steps to set up your iMac. Wait until Step 4 to turn on your iMac. Step 1: Pass the power cord through the hole in the stand, plug it into the power port on the back of your iMac, and then plug the cord into a power outlet.
Step 2: To access the Internet or a network, connect one end of an Ethernet cable to the Ethernet port on your iMac. Connect the other end to a cable modem, a DSL modem, or a network. Your iMac comes with AirPort (802.11n) technology for wireless networking. For information about setting up a wireless connection, choose Help > Mac Help and search for “AirPort.” To use a dial-up connection, you need an external USB modem.
Step 3: Turn on your wireless keyboard and mouse. Press the power button on the right side of your Apple Wireless Keyboard and slide the switch on the bottom of your Apple Magic Mouse to turn them on. Your wireless keyboard and mouse come with AA batteries installed, and they’re already paired with your iMac. Pairing allows them to communicate wirelessly with your iMac.
Step 4: Press the power (®) button on the back to turn on your iMac. You hear a tone when you turn on your iMac. Click your mouse to establish a connection with your iMac. ® ® ® Important: If your keyboard and mouse aren’t paired with your iMac, follow the onscreen instructions to pair them. You may have to click the mouse once to establish a connection. For more information about pairing, see “Pairing Your Apple Wireless Keyboard with Your iMac” on page 27.
Step 5: Use Setup Assistant to configure your iMac. The first time you turn on your iMac, Setup Assistant starts. Setup Assistant helps you enter your Internet and email information and set up a user account on your iMac. If you already have a Mac, Setup Assistant can help you automatically transfer files, applications, and other information from your previous Mac to your new iMac.
Putting Your iMac to Sleep or Shutting It Down When you finish working with your iMac, you can put it to sleep or shut it down. Putting Your iMac to Sleep If you‘ll be away from your iMac for less than a few days, put it to sleep. When your iMac is in sleep, its screen is dark. You can quickly wake your iMac and bypass the startup process. To put your iMac to sleep, do one of the following: ÂÂ Choose Apple () > Sleep from the menu bar. ÂÂ Press the power (®) button on the back of your iMac.
Shutting Down Your iMac If you won’t be using your iMac for more than a few days, shut it down. Choose Apple () > Shut Down. To turn your iMac on again, press the power (®) button. NOTICE: Shut down your iMac before moving it. Moving your iMac while the hard disk is spinning can damage the hard disk, causing loss of data or an inability to start up from the hard disk.
2 Life with Your iMac www.apple.
Basic Features of Your iMac Built-in microphone Camera indicator light Built-in FaceTime HD camera Built-in ambient light sensor Slot-loading SuperDrive SD card slot Built-in stereo speakers Built-in infrared receiver 18 Chapter 2 Life with Your iMac
Built-in microphone Capture sounds on your iMac, or talk with friends live over the Internet using the included iChat application. Built-in FaceTime HD camera and camera indicator light Use the FaceTime application to make video calls to other FaceTime users (on any iPhone 4, new iPod touch, or Mac with FaceTime), take pictures with Photo Booth, or capture video with iMovie. The indicator light glows when the FaceTime HD camera is operating.
Ports on Your iMac G Ethernet port (10/100/1000 Base-T) Thunderbolt ports (1 or 2) d USB 2.
G Ethernet port (10/100/1000Base-T) Connect to a high-speed 10/100/1000Base-T Ethernet network, connect a DSL or cable modem, or connect to another computer and transfer files. The Ethernet port automatically detects other Ethernet devices. One or two Thunderbolt ports (high-speed data, video, and audio) Connect Thunderbolt-compatible devices for high-speed data transfer, or connect an external display that uses Mini DisplayPort. You can purchase adapters to connect displays that use DVI, HDMI, or VGA.
Other Components of Your iMac Power port Security slot ® Power button ® Memory access (underneath) 22 Chapter 2 Life with Your iMac
Power port Connect the power cord to your iMac. Security slot Attach a lock and cable to discourage theft (available separately). ® Power button Press to turn on your iMac or put it to sleep. Hold down to restart your iMac during troubleshooting. Memory access Your iMac comes with at least 4 GB of memory installed as two 2 GB memory modules. Z ◊ 802.11n Wi-Fi (inside) Connect to a wireless network using built-in 802.11n Wi-Fi technology.
Features of the Apple Wireless Keyboard and Magic Mouse - Volume keys Apple Wireless Keyboard Media keys Brightness keys Apple Magic Mouse Exposé key 24 Chapter 2 Life with Your iMac Dashboard key C Media Eject key
Apple Magic Mouse Features a laser tracking engine, Bluetooth wireless technology, and a seamless top-shell that uses Multi-Touch technology to support multiple buttons, 360˚ scrolling, screen zoom, and swipe control of your iMac. Use Mouse preferences to adjust tracking, clicking, and scrolling speed, or to add secondary button support (see page 29). Apple Wireless Keyboard Combines wireless freedom with integrated function keys that work with your applications.
Using the Apple Wireless Keyboard Your Apple Wireless Keyboard, which comes with two AA batteries installed, is already paired with your iMac. Pairing means your keyboard and iMac are connected wirelessly and can communicate with each other. About the Indicator Light The LED on your Apple Wireless Keyboard functions as a battery indicator and a status light. When you first turn on your keyboard, the light glows steadily for 5 seconds, indicating the batteries are good, and then turns off.
Pairing Your Apple Wireless Keyboard with Your iMac If your Apple Wireless Keyboard isn’t paired with your iMac, the indicator light begins to blink, indicating your keyboard is in discovery mode and ready to pair with your iMac. To pair your wireless keyboard: 1 Press the power (®) button to turn on your wireless keyboard. 2 Choose Apple () > System Preferences, and then click Keyboard. 3 Click “Set Up Bluetooth Keyboard …” in the lower-right corner.
Using the Apple Magic Mouse Your Apple Magic Mouse, which comes with two AA batteries installed, is already paired with your iMac. Pairing means your Apple Magic Mouse and iMac are connected wirelessly and can communicate with each other. About the Indicator Light When you first turn on your Apple Magic Mouse, the light glows steadily for 5 seconds, indicating the batteries are good. If you turn your mouse on and the indicator light doesn’t glow, you may need to replace the batteries.
Pairing Your Apple Magic Mouse with Your iMac If your Apple Magic Mouse isn’t paired with your iMac, the indicator light begins to blink, indicating your mouse is in discovery mode and ready to pair with your iMac. To pair your mouse: 1 Slide the on/off switch on the bottom of your mouse to turn it on. 2 Choose Apple () > System Preferences, and then click Mouse. 3 Click “Set Up Bluetooth Mouse …” in the lower-right corner. 4 Select your wireless mouse, and then follow the onscreen instructions.
Using the Apple Remote If your iMac came with an Apple Remote, you can use it with Apple products that have a built-in infrared (IR) receiver. Control and play a DVD movie or music from your iTunes library, watch photo slideshows and movie trailers, and more. Up Select Left Right Down Menu Play/Pause To use your remote: 1 Press Play/Pause to play or pause a song, slideshow, or movie.
Pairing Your Apple Remote Pair your Apple Remote with your iMac or another Apple product. After you pair the iMac or Apple product, it’s controlled by only the paired remote. To pair your remote: 1 Move within 3 to 4 inches (8 to 10 cm) of your iMac or Apple product. 2 Point the remote at the IR receiver on the front of your iMac or Apple product. 3 Hold down Right and Menu for 5 seconds. When you’ve paired your remote, a chainlink symbol appears onscreen.
Getting Answers Much more information about using your iMac is available in Mac Help and on the Internet at www.apple.com/support/imac. To open Mac Help: 1 Click the Finder icon in the Dock (the bar of icons along the edge of the screen). 2 Choose Help > Mac Help (click the Help menu in the menu bar and choose Mac Help). 3 Click in the search field, type a question, and press Return on your keyboard.
To learn about See Using your keyboard or mouse System Preferences and choose Keyboard or Mouse. Or open Mac Help and search for “keyboard” or “mouse.” Using AirPort The AirPort Support page at www.apple.com/support/airport. Or open Mac Help and search for “AirPort.” Using Bluetooth wireless technology Open Mac Help and search for “Bluetooth.” Or go to the Bluetooth Support page at www.apple.com/support/bluetooth. Connecting a printer Mac Help and search for “printing.
3 Boost Your Memory www.apple.
Your iMac comes with at least 4 gigabytes (GB) of Double Data Rate 3 (DDR3) Dynamic Random Access memory (DRAM) installed as two 2 GB memory modules. You can replace or install additional 2 GB or 4 GB memory modules for up to a maximum of 16 GB.
Installing Memory Your iMac has four memory slots. Two are filled with at least a 2 GB memory module. You can install additional memory in the free slots or replace the memory in the filled slots with 2 GB or 4 GB memory modules, for up to 16 GB of memory. You can purchase additional Apple memory from an Apple Authorized Reseller, an Apple Retail Store, or the Apple Online Store at www.apple.com/store. WARNING: Always shut down your iMac and remove the power cord before installing memory.
4 Raise the stand and use a Phillips #2 screwdriver to loosen the three captive screws on the memory access door. Turn them counterclockwise. Raise stand Memory access door ® Phillips screwdriver 5 Remove the memory access door and set it aside.
6 Untuck the tabs in the memory compartment. 7 To replace memory modules, pull the tab to eject the installed memory module. Remove the memory modules you want to replace.
8 Insert the new memory modules in the slots with the notches facing right, as shown in the illustration. ÂÂ If you install additional memory modules, insert them in the open slots. ÂÂ If you replace the installed memory modules, insert a new memory module in each of the slots furthest from the display. 9 Press each memory module firmly and evenly into its slot. You’ll hear a slight click when the memory module is seated correctly. 10 Tuck the tabs into the memory compartment.
11 Replace the memory access door and tighten the three captive screws with a Phillips #2 screwdriver. WARNING: Remember to replace the memory access door after you install memory. Your iMac won’t function properly without the memory access door. Raise stand Memory access door ® Phillips screwdriver 12 Hold your iMac by its sides and return it to a standing position. Then reconnect the cables and power cord. 13 Press the power (®) button on the back of your iMac to turn it on.
Making Sure Your iMac Recognizes the New Memory After installing memory, make sure your iMac recognizes the new memory. To check the memory installed in your iMac: 1 Start up your iMac. 2 When you see the Mac OS X desktop, choose Apple () > About This Mac. You’ll see the total amount of memory installed in your iMac. For a detailed view of the amount of memory installed, open System Profiler by clicking More Info.
4 Problem, Meet Solution www.apple.com/support www.apple.
Occasionally you may have problems while working with your iMac. Read on for troubleshooting tips to try when you have a problem. You can also find more troubleshooting information in Mac Help or on the iMac Service & Support website at www.apple.com/support/imac. If you experience a problem working with your iMac, there’s usually a simple and quick solution. If you encounter a problem, try to make a note of what you did before the problem occurred.
Problems That Prevent You from Using Your iMac If your iMac won’t respond or the pointer won’t move ÂÂ Make sure your Apple Wireless Keyboard or Apple Magic Mouse are turned on and the batteries are charged. (See “Replacing the Batteries” on page 47.) If you’re using a USB keyboard or mouse, make sure they’re connected. Unplug and then plug in the connectors and make sure they are secure. ÂÂ Try to force problem applications to quit. Hold down the Option and Command (x) keys and press the Esc key.
If your iMac freezes during startup or you see a flashing question mark ÂÂ Wait a few seconds. If your iMac doesn’t start up after a delay, shut down your iMac by pressing and holding the power (®) button for about 5 seconds, until it shuts down. Then hold down the Option key and press the power (®) button again to start up your iMac. Keep holding down the Option key until your iMac starts up, then click the arrow under the icon of the startup disk you want to use.
Replacing the Batteries Your Apple Wireless Keyboard and Apple Magic Mouse each come with two AA batteries installed. You can replace them with alkaline, lithium, or rechargeable AA batteries. Keep the battery compartment cover and batteries out of the reach of small children. WARNING: When you replace the batteries, replace them all at the same time. Don’t mix old batteries with new batteries or mix battery types (for example, don’t mix alkaline and lithium batteries).
3 Slide two AA batteries into the battery compartment, as shown below. Insert batteries 4 Replace the battery compartment cover. To check the battery status, press the power (®) button. If the indicator light doesn’t glow, you may need to change the batteries. You can check the battery level in Keyboard preferences. Choose Apple () > System Preferences and click Keyboard. The battery level is in the lower-left corner.
3 Insert the batteries with the positive (+) ends facing up, as shown above. 4 Replace the cover and turn on your mouse. You may have to click your Apple Magic Mouse once to reconnect it to your iMac. To check the battery status, slide the on/off switch to turn on the mouse. If the indicator light doesn’t glow, you may need to change the batteries. You can check the battery level in Mouse Preferences. Choose Apple () > System Preferences and click Mouse. The battery level is shown in the lower-left corner.
6 If Apple Hardware Test detects a problem, it displays an error code. Make a note of the error code before pursuing support options. If Apple Hardware Test doesn’t detect a hardware failure, the problem may be software-related. If this procedure doesn’t work, you can insert the Applications Install DVD that came with your iMac to use Apple Hardware Test. For more information, see the Apple Hardware Test Read Me file on the Applications Install DVD.
Cable Modem, DSL Modem, and LAN Internet Connections Make sure all modem cables are firmly plugged in, including the modem power cord, the cable from the modem to your iMac, and the cable from the modem to the wall jack. Also check the cables and power supplies to any Ethernet hubs or routers. Turn the modem off and on and reset the modem hardware Turn off your DSL or cable modem for a few minutes, and then turn it back on. Some ISPs recommend that you unplug the modem’s power cord.
5 Enter the information you received from your service provider, such as the account name, password, and PPPoE service name (if your service provider requires it). 6 Click Apply to make the settings active. Network Connections Make sure the Ethernet cable is plugged into your iMac and into the network. Check the cables and power supplies to your Ethernet hubs and routers. If you have two or more computers sharing an Internet connection, be sure that your network is set up properly.
ÂÂ Make sure you’ve properly configured the software according to the instructions that came with your base station or access point. ÂÂ Make sure your iMac is within antenna range of the other computer or the network’s access point. Nearby electronic devices or metal structures can interfere with wireless communication and reduce this range. Repositioning or rotating your iMac might improve reception. ÂÂ Check the AirPort (Z) status menu in the menu bar. Up to four bars appear, indicating signal strength.
Reinstalling the Software That Came with Your iMac Use the software installation discs that came with your iMac to reinstall Mac OS X and any applications that came with your computer. Important: Apple recommends that you back up the data on your hard disk before restoring software. Apple is not responsible for any lost data. Installing Mac OS X To install Mac OS X: 1 Back up your important files. 2 Insert the Mac OS X Install DVD that came with your iMac. 3 Double-click Install Mac OS X.
Reinstalling Applications If you erased your hard disk as part of reinstalling Mac OS X, you must reinstall the applications that came with your iMac, such as the iLife applications. To install the applications that came with your iMac: 1 Back up your important files. 2 Insert the Applications Install DVD that came with your iMac. 3 Double-click Install Bundled Software. 4 Follow the onscreen instructions. 5 When the installation is complete, click Close.
Other Problems For a problem with software from a manufacturer other than Apple, contact the manufacturer. Software manufacturers often provide software updates on their websites. You can check for and install the latest Apple software using the Software Update pane of System Preferences. Your iMac is set to check automatically once a week, but you can set it to check daily or monthly. You can also check for updates manually. For more information, choose Help > Mac Help and search for “software update.
If you have trouble scrolling with your mouse ÂÂ If you have a mouse with a scroll ball and the scrolling feels rough or the scroll ball isn’t scrolling up, down, or side-to-side, hold the mouse upside-down and roll the ball vigorously while cleaning. ÂÂ See “Cleaning Your Mouse” on page 68 for more information. If you have a problem using your iMac or working with Mac OS X ÂÂ If the answer to your question isn’t in this manual, look in Mac Help for instructions and troubleshooting information.
Onscreen Help You can often find answers to your questions, as well as instructions and troubleshooting information, in Mac Help. Choose Help > Mac Help. System Profiler To get information about your iMac, use System Profiler. It shows you what hardware and software is installed, the serial number and operating system version, how much memory is installed, and more. To open System Profiler, choose Apple () > About This Mac from the menu bar and then click More Info.
Note: Your 90 days of complimentary telephone support begins on the date of purchase and telephone fees may apply. Country Phone Website United States 1-800-275-2273 www.apple.com/support Australia (61) 1-300-321-456 www.apple.com/au/support Canada (English) (French) 1-800-263-3394 www.apple.com/ca/support www.apple.com/ca/fr/support Ireland (353) 1850 946 191 www.apple.com/ie/support New Zealand 00800-7666-7666 www.apple.
Locating Your Product Serial Number Use any of these methods to find the serial number of your iMac: ÂÂ Choose Apple () > About This Mac. Click the version number beneath the words “Mac OS X” to cycle through the Mac OS X version number, the build version, and the serial number. ÂÂ Click the Finder icon and open /Applications/Utilities/System Profiler. Click Hardware in the Contents pane. ÂÂ Look on the bottom of the iMac stand.
5 Last, but Not Least www.apple.
For your safety and that of your equipment, follow these rules for handling and cleaning your iMac and for working more comfortably. Keep these instructions handy for reference by you and others. NOTICE: Incorrect storage or use of your computer may void the manufacturer’s warranty. Important Safety Information WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage. Proper handling Set up your iMac on a stable work surface.
Unplug the power cord (by pulling the plug, not the cord) and disconnect the ethernet cable or phone cord if any of the following conditions exist: ÂÂ You want to add memory ÂÂ The power cord or plug becomes frayed or otherwise damaged ÂÂ You spill something into the case ÂÂ Your iMac is exposed to rain or excess moisture ÂÂ Your iMac has been dropped or the case has been damaged ÂÂ You suspect that your iMac needs service or repair ÂÂ You want to clean the case (use only the recommended procedure describe
Power specifications: ÂÂ Voltage: 100 to 240 V AC ÂÂ Current: 4 A, maximum ÂÂ Frequency: 50 to 60 Hz Hearing damage Permanent hearing loss may occur if earbuds or headphones are used at high volume. Set the volume to a safe level. You can adapt over time to a higher volume of sound that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked.
A Class 1 laser is safe under reasonably foreseeable conditions per the requirements in IEC 60825-1 and 21 CFR 1040. However, it is recommended that you do not direct the laser beam at anyone’s eyes. Laser Information for Optical Disc Drives WARNING: Making adjustments or performing procedures other than those specified in your equipment’s manual may result in hazardous radiation exposure.
Important Handling Information NOTICE: Failure to follow these handling instructions could result in damage to your iMac or other property.
Using connectors and ports Never force a connector into a port. When connecting a device, make sure the port is free of debris, that the connector matches the port, and that you have positioned the connector correctly in relation to the port. Using the optical drive The SuperDrive in your iMac supports standard 12 cm (4.7 inch) discs. Irregularly shaped discs or discs smaller than 12 cm (4.7 inches) are not supported.
Cleaning Your Mouse You may need to clean your mouse from time to time to remove dirt and dust that has accumulated. Use a lint-free cloth that’s been lightly moistened with water. Don’t get moisture in any openings or use aerosol sprays, solvents, or abrasives. If you use a wired Apple Mouse with your iMac, hold the mouse upside-down and roll the scroll ball vigorously with a clean, soft, lint-free cloth, to help dislodge any particles that may interfere with proper scrolling.
Display Arrange the display so that the top of the screen is slightly below eye level when you’re sitting at the keyboard. The best distance from your eyes to the screen is up to you, although most people seem to prefer 18 to 28 inches (45 to 70 cm). Position the display to minimize glare and reflections on the screen from overhead lights and nearby windows. The stand lets you set the display at the best angle for viewing, helping to reduce or eliminate glare from lighting sources you can’t move.
Chair An adjustable chair that provides firm, comfortable support is best. Adjust the height of the chair so your thighs are horizontal and your feet are flat on the floor. The back of the chair should support your lower back (lumbar region). Follow the manufacturer’s instructions for adjusting the backrest to fit your body properly. You might have to raise your chair so that your forearms and hands are at the proper angle to the keyboard.
Regulatory Compliance Information FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See instructions if interference to radio or television reception is suspected.
FCC Bluetooth Wireless Compliance Taiwan Wireless Statements The antenna used with this transmitter must not be colocated or operated in conjunction with any other antenna or transmitter subject to the conditions of the FCC Grant. Bluetooth Industry Canada Statement This Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
External USB Modem Information European Union—Disposal Information: When connecting your iMac to the phone line using an external USB modem, refer to the telecommunications agency information in the documentation that came with your modem. ENERGY STAR® Compliance As an ENERGY STAR® partner, Apple has determined that standard configurations of this product meet the ENERGY STAR® guidelines for energy efficiency.
California: The coin cell battery in the optional Apple Remote contains perchlorates. Special handling and disposal may apply. Refer to: www.dtsc.ca.
Looking for Something?
Index 802.11n Wi-Fi.
dial-up connection 11 DIMMs.
Migration Assistant 14 modem cable 21 DSL 21 external USB 11, 21, 73 mouse cleaning 68 features 25 indicator light 28 pairing 29 setting up 12 using 29 wireless 12 N network address translation (NAT) 52 connecting to 11 connection problems 52 diagnostics 50 setup assistant 50 wireless 11 Network Setup Assistant 50 O online resources 57 onscreen help 58 operating environment 66 optical digital audio 21 optical drive about 19 safety 65 supported disc sizes 67 78 Looking for Something? P pairing keyboar
System Preferences customizing the desktop 14 Energy Saver 15 Software Update 53, 56 Startup Disk 46 System Profiler 58 T Thunderbolt 21 transferring information 14 troubleshooting AppleCare 58 computer freezes during startup 46 computer won’t respond 45 computer won’t turn on 46 date and time settings 57 ejecting a disc 56 force an application to quit 45 Internet connection 50 PPPoE connections 51 reinstalling Mac OS X 54 resetting PRAM 46 service and support 57 using Mac Help 58 turning on your iMac 13
KKApple Inc. © 2011 Apple Inc. All rights reserved. The FireWire logo, iPad, and Multi-Touch are trademarks of Apple Inc. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple. AppleCare, Apple Store, and iTunes Store are service marks of Apple Inc., registered in the U.S. and other countries. Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for printing or clerical errors.
