Instructions

On most watches, you can set the day and date by
pulling the crown 1 click.
Turn the crown clockwise (away from you) to
change the date.Turn the crown counterclockwise
(towards you) to change the day.
Set the day and date to the day BEFORE today. By
setting the day and date before the day it actually
is, you can then manually push the hours forward
until the day swaps over to the next day. When it
does, you will have made sure your watch is set to
AM.
10. Set the correct time (and date)
Pull the crown all the way out (2 clicks) and turn the
crown clockwise (away from you) until you see the
day-date change to the AM of TODAY. Now set the
watch to the correct time.
Push the crown fully in and screw down if applicable.
Problem solving
Automatic watch does not run or is slow
If, after setting the correct time on your watch the second hand has not immediately
moved or is slow, it is adviseable to have your watch checked by a licenced watch
maker.
The date changes to early or too late
The date on the watch was not set to the correct AM time. Repeat steps 8-10.