ThinkTank User's Manual

ThinkTank Manual
DISK Configure ThinkTank to your disk drives
Command key: D
Command prefix: No
Location: UTILITIES Command Menu
See also: FILES; UTILITIES
You can use the DISK command to tell ThinkTank about your
disk configuration. ThinkTank uses this information to tailor
the FILES command procedure for creating or changing outlines.
When you select UTILITIES/DISK, ThinkTank displays your
current disk configuration on the screen. If you confirm that
it’s incorrect, the program displays the DISK CONFIGURATION
Menu. The options are:
* TWO: Select this option if you have two floppy disk
drives and do not have a hard disk drive. (Command
key T)
* MORE: Select this option if you have more than two
floppy disk drives and do not have a hard disk
drive. ThinkTank will continue by asking you the ex-
act number of floppy drives you have. You may enter
a number between 2 and 6. (Command key N)
* HARD: Select this option if you have a hard disk
drive, regardless of how many floppy drives you
have. (Command key H)
* ESCAPE: Cancels the DISK command and returns to Top
Level. (Command key ESC)
When you make a selection, ThinkTank saves the new configura-
tion on your THINKTANK PROGRAM DISK and returns to Top Level.
The next time you give the FILES command, the program will fol-
low the procedure for your new configuration.
—126—