Specifications
Table Of Contents
- Color StyleWriter 6500
- Basics
- Specifications
- Troubleshooting
- Take Apart
- Paper Tray
- Top Cover
- Access Door
- Side Access Door
- Keypad Bezel
- Lightpipe Assembly
- Base
- Logic Board EMI Shield
- Power Supply EMI Shield
- Logic Board
- Power Supply Board
- Flex Clamp
- Ribbon Cable
- Access Door Actuator
- Ground Plane
- Encoder Strip
- Encoder Stiffener
- Carriage Belt
- Turnaround Assembly
- Idler Assembly
- Carriage Motor
- Purge Unit
- Absorber Assembly
- Purge Unit Motor
- Paper Motor
- Mechanical Assembly
- Additional Procedures
- Exploded View
Troubleshooting Symptom Charts/Print Quality - 20
Print Quality
Missing dots 1 Perform “Fiber Track Cleaning” in Additional Procedures.
2 Perform “Print Head Cleaning” in Additional Procedures.
3 Make sure ink cartridges are set firmly.
4 Use only specified paper, envelopes, transparencies.
5 Replace ink cartridge. See Additional Procedures chapter.
6 Reseat logic board connectors. Replace logic board.
Carriage moves but
printer doesn’t print
1 Make sure the tape is removed from the ink cartridge.
2 Remove and clean the print cartridge contacts.
3 Perform “Print Head Cleaning” in Additional Procedures.
4 Replace ink cartridge. See Additional Procedures.
5 Reseat logic board connectors. If problem continues, replace
logic board.
6 Replace mechanical assembly.