Specifications
Table Of Contents
- Color StyleWriter 6500
- Basics
- Specifications
- Troubleshooting
- Take Apart
- Paper Tray
- Top Cover
- Access Door
- Side Access Door
- Keypad Bezel
- Lightpipe Assembly
- Base
- Logic Board EMI Shield
- Power Supply EMI Shield
- Logic Board
- Power Supply Board
- Flex Clamp
- Ribbon Cable
- Access Door Actuator
- Ground Plane
- Encoder Strip
- Encoder Stiffener
- Carriage Belt
- Turnaround Assembly
- Idler Assembly
- Carriage Motor
- Purge Unit
- Absorber Assembly
- Purge Unit Motor
- Paper Motor
- Mechanical Assembly
- Additional Procedures
- Exploded View
Troubleshooting Symptom Charts/Operation - 8
Carriage collides
with left side
1 Make sure white plastic clutch actuator is not interfering
with carriage movement. If necessary, reseat clutch
actuator. See “Fixing Carriage Stalls” in Additional
Procedures for location of clutch actuator.
2 Remove obstructions from carriage and paper paths.
3 Clean excessive ink or oil from encoder strip, carriage
assembly, and carriage path components.
4 Be sure encoder strip stiffner is in place. Replace encoder
strip.
5 Reseat logic board connectors. If problems continue, replace
logic board.
6 Check mechanical assembly for damage and proper operation.
7 Replace faulty or damaged mechanical assembly.