Specifications
Table Of Contents
- Color StyleWriter 6500
- Basics
- Specifications
- Troubleshooting
- Take Apart
- Paper Tray
- Top Cover
- Access Door
- Side Access Door
- Keypad Bezel
- Lightpipe Assembly
- Base
- Logic Board EMI Shield
- Power Supply EMI Shield
- Logic Board
- Power Supply Board
- Flex Clamp
- Ribbon Cable
- Access Door Actuator
- Ground Plane
- Encoder Strip
- Encoder Stiffener
- Carriage Belt
- Turnaround Assembly
- Idler Assembly
- Carriage Motor
- Purge Unit
- Absorber Assembly
- Purge Unit Motor
- Paper Motor
- Mechanical Assembly
- Additional Procedures
- Exploded View
Troubleshooting Symptom Charts /Operation- 7
Does not print 1 Refer to LEDs later in this chapter.
2 Turn on printer and restart computer.
3 Check interface cable and connector. Replace interface cable.
4 Open Chooser and verify correct printer driver and port.
5 Replace printer driver.
6 Reseat logic board connectors. Replace logic board.
I/O failure 1 Check interface cable and connector.
2 Replace interface cable.
3 Reseat logic board connectors. Replace logic board.