Specifications
Table Of Contents
- Color StyleWriter 6500
- Basics
- Specifications
- Troubleshooting
- Take Apart
- Paper Tray
- Top Cover
- Access Door
- Side Access Door
- Keypad Bezel
- Lightpipe Assembly
- Base
- Logic Board EMI Shield
- Power Supply EMI Shield
- Logic Board
- Power Supply Board
- Flex Clamp
- Ribbon Cable
- Access Door Actuator
- Ground Plane
- Encoder Strip
- Encoder Stiffener
- Carriage Belt
- Turnaround Assembly
- Idler Assembly
- Carriage Motor
- Purge Unit
- Absorber Assembly
- Purge Unit Motor
- Paper Motor
- Mechanical Assembly
- Additional Procedures
- Exploded View
Troubleshooting Standard Troubleshooting Procedure/ - 5
Standard Troubleshooting Procedure
1 Visually inspect the printer for any potential cause for the
printer to be returned.
2 Run Printer Self-Test and evaluate print quality. (See
preceding page or refer to Additional Procedures.)
3 Run Diagnostic Test pages and evaluate print quality. (See
preceding page or refer to Additional Procedures.)
4 Connect printer to compute. Run the Color SW 6500
Utilities to verify the printer properly received the signals
and prints the test pages.
5 Try a known good printer cable and retest.