Specifications
Table Of Contents
- Color StyleWriter 6500
- Basics
- Specifications
- Troubleshooting
- Take Apart
- Paper Tray
- Top Cover
- Access Door
- Side Access Door
- Keypad Bezel
- Lightpipe Assembly
- Base
- Logic Board EMI Shield
- Power Supply EMI Shield
- Logic Board
- Power Supply Board
- Flex Clamp
- Ribbon Cable
- Access Door Actuator
- Ground Plane
- Encoder Strip
- Encoder Stiffener
- Carriage Belt
- Turnaround Assembly
- Idler Assembly
- Carriage Motor
- Purge Unit
- Absorber Assembly
- Purge Unit Motor
- Paper Motor
- Mechanical Assembly
- Additional Procedures
- Exploded View
Additional Procedures Interpreting the NVM (Non-Volatile Memory) Grid - 63
Interpreting the NVM (Non-Volatile
Memory) Grid
The NVM contains information such as page count, pen
count, xy settings, and last error trap. The extended
diagnostic test prints this information in hexadecimal
format. This information is held in memory, even when the
printer is shut off. Use the NVM decoder sheet shown in this
section, along with the hex converter shareware tool to
interpret information on the NVM grid. The hex converter
tool is on the Companion CD (path: Diagnostic Utility/
Color SW 6500 Utilities/Color SW 6500 Hex
Converter).