Specifications
Table Of Contents
- Color StyleWriter 6500
- Basics
- Specifications
- Troubleshooting
- Take Apart
- Paper Tray
- Top Cover
- Access Door
- Side Access Door
- Keypad Bezel
- Lightpipe Assembly
- Base
- Logic Board EMI Shield
- Power Supply EMI Shield
- Logic Board
- Power Supply Board
- Flex Clamp
- Ribbon Cable
- Access Door Actuator
- Ground Plane
- Encoder Strip
- Encoder Stiffener
- Carriage Belt
- Turnaround Assembly
- Idler Assembly
- Carriage Motor
- Purge Unit
- Absorber Assembly
- Purge Unit Motor
- Paper Motor
- Mechanical Assembly
- Additional Procedures
- Exploded View
Additional Procedures Clearing Paper Jams - 52
Clearing Paper Jams
The paper jam error state occurs if the printer detects
paper at the platen after attempting to eject paper to the
OUT tray. The Power and Resume lights alternately blink
to indicate this condition.
Note: The Power and Resume lights alternately blink to
indicate other error conditions, such as a carriage stall.
Make sure this condition is caused by a paper jam.
Caution: Clear paper jams by feeding paper through the
paper path; do NOT pull paper out by force. Doing so could
damage the printer.