Specifications
Table Of Contents
- Color StyleWriter 6500
- Basics
- Specifications
- Troubleshooting
- Take Apart
- Paper Tray
- Top Cover
- Access Door
- Side Access Door
- Keypad Bezel
- Lightpipe Assembly
- Base
- Logic Board EMI Shield
- Power Supply EMI Shield
- Logic Board
- Power Supply Board
- Flex Clamp
- Ribbon Cable
- Access Door Actuator
- Ground Plane
- Encoder Strip
- Encoder Stiffener
- Carriage Belt
- Turnaround Assembly
- Idler Assembly
- Carriage Motor
- Purge Unit
- Absorber Assembly
- Purge Unit Motor
- Paper Motor
- Mechanical Assembly
- Additional Procedures
- Exploded View
Additional Procedures Printer Tests - 15
Final Test
The Final Test is used at the end of the manufacturing line to verify correct printer
operation and can, therefore, be useful in service situations. Similar to the extended
diagnostic test, it prints out detailed tests of the print cartridges, including showing if
entire addresses or primitives are out. In addition, it tests the xy alignment, bi-directional
printing, line feed, and skew.
The Final Test utility is on the Companion CD (path: Diagnostic Utilities/Color SW 6500
Utilities/Color SW 6500 Final Test).
Using the Utility
1 Copy the Color SW 6500 Final Test folder to the compute.
2 Make sure the printer is on and connected to the computer’s printer port.