Specifications
Table Of Contents
- Color StyleWriter 6500
- Basics
- Specifications
- Troubleshooting
- Take Apart
- Paper Tray
- Top Cover
- Access Door
- Side Access Door
- Keypad Bezel
- Lightpipe Assembly
- Base
- Logic Board EMI Shield
- Power Supply EMI Shield
- Logic Board
- Power Supply Board
- Flex Clamp
- Ribbon Cable
- Access Door Actuator
- Ground Plane
- Encoder Strip
- Encoder Stiffener
- Carriage Belt
- Turnaround Assembly
- Idler Assembly
- Carriage Motor
- Purge Unit
- Absorber Assembly
- Purge Unit Motor
- Paper Motor
- Mechanical Assembly
- Additional Procedures
- Exploded View
Additional Procedures Printer Tests - 11
Extended Diagnostic Test
The extended diagnostic test show detailed information on the print cartridges and also prints
out the contents of the Non-Volatile Memory (NVM). The top section of the test will show if
any nozzles are out. Random nozzle outs are due to the print cartridge; cleaning will often
clear them (see Print Head Cleaning Procedure in this section). The NVM contains
information such as page count, pen count, xy settings, and last error trap. The test prints
this information in hexadecimal format.
To print the Extended Diagnostic Test page:
1 With the printer on, press and hold the Power button.
2 Press the Resume button 12 times.
3 Release the Power button.
The printer will print out the Extended Diagnostic Test page shown on the next page.