Installation manual

Chapter 4 Organizing Client Computers into Computer Lists 55
5 Authenticate by providing a user name and password for an Apple Remote Desktop
administrator.
The computer is now in your All Computers list.
Finding Clients by Searching the Local Network
When you choose a local network scanner, Remote Desktop sends a subnet broadcast
to computers on the same subnets as the administrator computer. All possible clients
on the local subnets appear in a list on the right side of the Remote Desktop window.
To search for clients on the local network:
1 Select a scanner at the left of the Remote Desktop window.
2 Choose Local Network.
All responding clients are listed in the Remote Desktop window.
3 Select the desired computers.
4 Drag the selected computers to the All Computers list.
5 Authenticate by providing a user name and password for an Apple Remote Desktop
administrator.
The computer is now in your All Computers list.
Finding Clients by Searching a Network Range
To locate computers by network range, you provide a beginning and ending IP
address to scan, and Apple Remote Desktop queries each IP address in that range in
sequence, asking if the computer is a client computer. This method works best when
searching for clients outside the local subnet, but on the local area network.
Alternatively, you can use a text le that contains IP address ranges (in this format:
“192.168.0.1-192.168.3.20”), and use text le import to nd clients. See “Finding Clients
by File Import” on page 56.
To search a range of network addresses:
1 Select a scanner at the left of the Remote Desktop window.
2 Select Network Range.
3 Enter the beginning and ending IP address.
4 Click the Refresh button.
All responding clients are listed in the Remote Desktop window.
5 Select the desired computers.
6 Drag the selected computers to the All Computers list.
7 Authenticate by providing a user name and password for an Apple Remote
Desktop administrator.
The computer is now in your All Computers list.