User`s guide

Installing the batteries
Use the three NiCad batteries that came with your camera. If the NiCad
batteries are being charged, you can substitute three AA non-rechargeable
batteries in the camera.
1 Flip open the door to the battery compartment.
2 Insert the batteries into the camera.
3 Close the battery compartment door.
See also: Appendix B, “Battery Information.”
Position the – and
+
ends of each
battery as indicated on the door.
Arrange the ribbon under the batteries so you can use
it to pull them out when you need to replace them.
WARNING Do not mix different types of batteries in the camera. Use
only three NiCad batteries or three AA non-rechargeable batteries.
Mixing batteries may cause a fire or a small explosion.
5
Getting Started With the QuickTake 100 Camera