Owner`s manual

Basics Camera Operation - 9
1 Turn off the camera.
2 Set the mode dial to Computer ( ).
3 Connect the computer cable to the Digital port on the camera.
4 Connect the other end of the computer cable to the modem port.
5 Turn on the camera.
“PC-MODE” appears on the LCD screen.
6 To open the Camera Access application, double-click the icon on your computer. (Refer
to Chapter 3 in the Apple QuickTake 200 owner’s manual.)
Erase Mode
When the camera is in Erase ( ) mode, you can erase a single frame, erase all frames on
the memory card, or format the card before you use it. You cannot erase protected frames.
Important: You cannot use Erase mode with write-protected cards.
1 Turn the mode dial to Erase ( ).
The “ERASE-MODE” selections appear on the LCD screen.
2 Use the + and - buttons to select the function that you want.
• FRAME: Erase one image.
• ALL: Erase all images.
• FORMAT: Format a memory card. ( Important: Refer to Chapter 1 in the Apple
QuickTake 200 owner’s manual).
3 Press the action button.
The function you selected appears in the upper-left corner of the LCD screen: “ERASE
FRAME” or “ERASE ALL”.
4 Press the action button again.
“OK?” flashes on your screen, giving you a chance to verify that you want to erase the
image.
5 Press the action button a third time to erase the image.
If you selected “ERASE FRAME”, the next image appears on the screen. You can continue
to erase frame-by-frame or skip a frame by moving forward or backward using the +
and - buttons.
6 Turn the mode dial to another icon to leave Erase mode.
To view nine images in Erase mode,
1 Set the mode dial to Erase ( ).
2 Press the action button to select “ERASE FRAME”.