Owner`s manual

Basics Camera Operation - 8
3 Press the + and - buttons at the same time.
Nine images appear on your LCD screen.
4 Press the + and - buttons to select and view the frames.
5 To revert to single-frame playback, press the + and - buttons at the same time again.
A single image appears on your LCD screen.
To view images on a color television,
1 Make sure the camera and television are turned off.
Important: Your television must meet NTSC (National Television System Committee)
color television telecasting specifications (adopted mainly in the United States, Canada,
and Japan).
2 Plug the optional power adapter into your camera to conserve the batteries.
3 Set the mode dial to Play ( ).
4 Connect the video cable to the Video Out port on the camera.
5 Connect the other end of the video cable to the video input port on the television.
6 Use the + and - buttons to scroll forward and backward one frame at a time through your
pictures.
7 Press the + and - button at the same time to view multiple images.
Auto-Play Mode
Use the Auto-Play ( ) mode to have the camera automatically play back consecutive
frames of images.
1 Set the mode dial to Auto-Play ( ).
The Auto-Play settings appear on the LCD screen.
2 Press the + and - button to select 3, 5, or 10 seconds between each frame.
3 Press the action button to begin viewing the images.
You can also use Auto-Play mode to play back consecutive frames of images on your
television.
1 Follow the steps in Play mode to connect the camera to the television.
2 Follow the steps in Auto-Play mode to view images on your television.
Computer Mode
In Computer ( ) mode, you can connect your camera to your computer to transfer
pictures and perform other camera functions using the Camera Access software. (Refer to
Chapter 3 in the Apple QuickTake 200 owner’s manual.)