Operation Manual
Table Of Contents
- Contents
- 1 Getting Started With the QuickTake 100 Camera
- 2 Using the Camera to Take Pictures
- 3 Using the Camera With Your Macintosh
- 4 QuickTake Software Menu Commands
- 5 Maintenance and Troubleshooting
- Appendix A Specifications
- Appendix B Battery Information
- Appendix C Using the Camera with a Windows-Based PC
- Appendix D Using QuickTake Setup
- Index
The QuickTake camera comes with three AA rechargeable NiCad (nickel-
cadmium) batteries and a battery charger. In place of the NiCad batteries, the
camera can use other AA batteries. This appendix contains important
information about the battery charger and the batteries you can use in the
QuickTake camera.
Important safety instructions for using the battery charger
m Save this manual. It contains important safety and operating instructions.
m Before using the battery charger, read all instructions and cautionary
markings on the charger, the batteries, and the QuickTake camera.
m The battery charger is designed for indoor use only. Do not expose the
charger to rain or snow.
m Charge only NiCad rechargeable batteries. Charging other types of
batteries with the charger that came with the camera may cause them to
leak or explode, resulting in personal injury and property damage.
m Use of an attachment (such as a battery charger, power supply, or serial
cable) not recommended specifically for use with QuickTake 100 and sold
by Apple Computer may result in a risk of fire, electrical shock, or injury.
m Do not plug the charger into an extension cord.
57
Appendix B
Battery Information