Operation Manual
Table Of Contents
- Contents
- 1 Getting Started With the QuickTake 100 Camera
- 2 Using the Camera to Take Pictures
- 3 Using the Camera With Your Macintosh
- 4 QuickTake Software Menu Commands
- 5 Maintenance and Troubleshooting
- Appendix A Specifications
- Appendix B Battery Information
- Appendix C Using the Camera with a Windows-Based PC
- Appendix D Using QuickTake Setup
- Index
Taking pictures from the Macintosh
You can use the camera controls on your Macintosh to take pictures.
1 Connect the camera to your Macintosh.
For instructions, see “Connecting the Camera to Your Macintosh” earlier in
this chapter.
2 Arrange the camera so it’s in a position to take the picture you want.
3 Choose Camera Controls from the Camera menu.
4 In the box that appears, change any settings to suit your needs.
For details about the different settings, see “Using the Controls” in Chapter 2.
5 When you’re ready, click Take a Picture.
You can use the Erase All button to erase the pictures on the camera.
Remember that the control erases all the images permanently.
37
Using the Camera With Your Macintosh
Resolution button
Timer button
Flash button
Erase All button