Operation Manual
Table Of Contents
- Contents
- 1 Getting Started With the QuickTake 100 Camera
- 2 Using the Camera to Take Pictures
- 3 Using the Camera With Your Macintosh
- 4 QuickTake Software Menu Commands
- 5 Maintenance and Troubleshooting
- Appendix A Specifications
- Appendix B Battery Information
- Appendix C Using the Camera with a Windows-Based PC
- Appendix D Using QuickTake Setup
- Index
Looking at the pictures in the camera
While the pictures are in the camera, you can see what they look like and
work with them. (To move them to your Macintosh before you work with
them, see the next section, “Transferring Pictures to Your Macintosh.”)
1 Connect the camera to your Macintosh.
For instructions, see “Connecting the Camera to Your Macintosh,” earlier in
this chapter.
2 If necessary, turn on the camera by sliding open the lens cover.
3 On your Macintosh, double-click the QuickTake icon to open it.
4 Choose View Slides in Camera from the Camera menu.
The pictures appear in a slide table on your Macintosh screen.
For information about what you can do with the pictures, see “Working With
Your Pictures,” later in this chapter.
20
Chapter 3