Operation Manual
Table Of Contents
- Contents
- 1 Getting Started With the QuickTake 100 Camera
- 2 Using the Camera to Take Pictures
- 3 Using the Camera With Your Macintosh
- 4 QuickTake Software Menu Commands
- 5 Maintenance and Troubleshooting
- Appendix A Specifications
- Appendix B Battery Information
- Appendix C Using the Camera with a Windows-Based PC
- Appendix D Using QuickTake Setup
- Index
3 Plug the other end of the cable into the serial port on the camera.
4 Turn on the camera (open the lens cover).
When the camera is connected and turned on, an animated rectangle appears
on the control panel display.
The edge of the
rectangle moves.
Press the cover in and slide it open. Serial port
19
Using the Camera With Your Macintosh