Operation Manual
Table Of Contents
- Contents
- 1 Getting Started With the QuickTake 100 Camera
- 2 Using the Camera to Take Pictures
- 3 Using the Camera With Your Macintosh
- 4 QuickTake Software Menu Commands
- 5 Maintenance and Troubleshooting
- Appendix A Specifications
- Appendix B Battery Information
- Appendix C Using the Camera with a Windows-Based PC
- Appendix D Using QuickTake Setup
- Index
Waking the camera
To conserve battery power, the camera goes to sleep after 60 seconds of
inactivity (or after 5 minutes of inactivity when connected to your
Macintosh). To wake it, you can press and release the shutter, or close and
reopen the sliding lens cover.
If the camera is connected to your Macintosh, you must close and reopen the
lens cover to wake it. Pressing the shutter won’t work.
To wake the camera, press
and release the shutter.
Or close and reopen the lens cover.
16
Chapter 2