Operation Manual
Table Of Contents
- Contents
- 1 Getting Started With the QuickTake 100 Camera
- 2 Using the Camera to Take Pictures
- 3 Using the Camera With Your Macintosh
- 4 QuickTake Software Menu Commands
- 5 Maintenance and Troubleshooting
- Appendix A Specifications
- Appendix B Battery Information
- Appendix C Using the Camera with a Windows-Based PC
- Appendix D Using QuickTake Setup
- Index
Timer
The timer gives you 10 seconds before the camera takes a picture.
1 Press the timer button.
2 Press the shutter and prepare for the picture.
On the top front of the camera, a red indicator light glows steadily for eight
seconds, then it blinks rapidly for another two seconds. When time is up, the
camera takes the picture.
A
When the timer is on,
the timer icon blinks.
15
Using the Camera to Take Pictures