Specifications

PowerBook G4 (12-inch 1.33 GHz) Take Apart - 3
General Information
Tools
The following tools are recommended for this computer:
• Coin
• ESD wriststrap and mat
• Small soft cloth
• Black stick (or other nonconductive nylon or plastic flat-blade tool)
• #0 Phillips screwdriver (magnetized)
• #1 Phillips screwdriver (magnetized)
• Jeweler’s flat-blade screwdriver
• 1.5 mm hex driver
• 4 mm socket wrench or needlenose pliers
• nonconductive tweezers or needlenose pliers (for replacing a foot or for routing thin
cables such as the AirPort antenna cable)
Important: To organize the screws you remove from the computer, use a tray with divided
compartments (such as a plastic ice cube tray). If doing a complete disassembly, note the
screws removed from each location in the computer.
Warning: Check the screw lengths before installing the screws. Installing a longer
screw in the wrong place can permanently damage the housing or an internal part.
Serial Number Location
The serial number is located in the battery bay.