User`s guide

Tro u b l e s h o o t i n g

If you encounter a problem while installing or using your Zip drive, check

this section for help or visit VST’s web site at www.vsttech.com.

1. Green power light does not come on, or Zip disk cannot be inserted.

The drive may not be inserted correctly in the expansion bay. Remove

and reinsert the drive.

2. PowerBook does not start up properly after the Zip drive is installed.

Remove the Zip drive from the computer and restart. If the PowerBook

restarts correctly, reinstall the Zip drive.

3. The Iomega software cannot find the Zip drive or the Zip drive is

not recognized.

a. Make sure the drive is properly inserted (The green power light

on the drive should be ON.) Try removing the Zip drive and then

reinserting.

b. Open the Extensions folder in the System Folder.

If Iomega Driver is not present, reinstall the Zip

drive software following the instructions on Page 2,

‘Setting Up the VST Zip Software’.

• It is a good idea to return the Zip disk to its case when it is

not in use.

• Avoid exposing Zip disks to direct sunlight, high temperature,

moisture, and magnetic fields.

Warning: Do not use ordinary 3.5” floppy head cleaning diskettes

or data diskettes. They WILL damage your Zip drive.