User`s guide

Iomega Tools Software

IomegaWare is a package of software tools and applications designed to

help you take advantage of all the features of your Zip drive. You can use

Tools to format, copy, and protect your Zip disks. If Iomega Tools are not

already set up on your PowerBook, you need to install them using the

instructions in the section “Getting Started” starting on page 1.

For information on using Tools, open the Tools application program after

the software is installed (located in the Iomega Tools folder) on the Mac

hard disk and click the Help button.

Read/Write Protecting Zip Disks

Your Tools software includes a special read/write protect feature that

lets you:

• Write Protect a Zip disk through software instead of with a

mechanical write protect switch.

• Write Protect a Zip disk and assign a password that must be used

to remove the write protect.

• Read Protect a Zip disk so that it cannot be read from, or written

to, unless the user enters the password you assign.

For information on using read/write protect, refer to the Tools manual

in the Iomega Tools folder.