Technical information

Inverter BoardTake Apart
PowerBook (FireWire)
22
Inverter Board
Before you begin, remove
the following:
• AC adapter
• expansion bay modules
• keyboard
• microprocessor EMI
shield
Important:
Do not flex or
bend the inverter board.
1. Lift the front of the
clutch cover up until
you can disengage the
hooks at the back edge
of the cover.
Replacement Note:
Line up
the hooks on the top edge of
the clutch cover to the
corresponding latches,
then press the bottom edge
of the clutch cover down on
both ends until it snaps
into place.