Technical information

Hard DriveTake Apart
PowerBook (FireWire)
19
2. Pull up on the tab until
the hard drive lifts up,
then pull the hard
drive out of its bay.
3. Remove the four T-8
screws at each black
grommet.
4. Pull the hard drive
away from the bracket
and pull the hard drive
cable through the slot
in the bracket.
5. Loosen both sides of the
hard drive connector
with a nylon tool
before pulling up on
the hard drive cable.
Important:
Bent pins in the
hard drive cable may affect
the performance of the
hard drive.