Technical information

SDRAMTake Apart
PowerBook (FireWire)
15
SDRAM
Before you begin, remove
the following:
• AC adapter
• expansion bay modules
• keyboard
• microprocessor EMI
shield
• microprocessor board
There are two expansion
slots for RAM modules on
the microprocessor board.
The factory-installed RAM
is on the underside of the
microprocessor board.
1. Pull the snaps on
either side of the RAM
card to the sides. The
card will tilt up.
2. Pull the RAM card out.
Replacement Note:
Hold
the RAM card at a 30-
degree angle and line up
the notch in the RAM card
with the small plastic tab
in the RAM expansion slot.
Push in on the card and
then down until the two
snaps click into place.