Technical information

AirPort CardTake Apart
PowerBook (FireWire)
9
AirPort Card
Before you begin, remove
the following:
• AC adapter
• expansion bay modules
• keyboard
• microprocessor EMI
shield
Important:
If no AirPort
Card is present, park the
antenna cable connector in
the plastic holder next to
the modem. This keeps the
cable connector from
moving around and
possibly shorting the
system.
1. If an AirPort card is
installed, lift up on the
AirPort Card tab and
raise the card slightly,
then disconnect the
antenna cable from the
card.
2. Pull the tab to the
right to remove the
card from its slot.
Replacement Note:
Tuck
the edge of the tab under
the plastic cover on the
inverter board to keep the
card flat.