Technical information

Display CableTake Apart
PowerBook (FireWire)
51
4. Remove the two black
Phillips screws on the
right clutch.
5. Remove the two black
Phillips screws on the
right brace.
6. Remove the two silver
Phillips screws on the
right antenna ground,
deroute the antenna,
and move it out of the
way.
7. Lift the LCD panel away
from the bezel.
8. Pull the display cable
tab off its retaining
post on the clutch.
9. Peel up the end of the
tape on the display
cable and unwind it
from the clutch.
10. Remove the cable from
the clutch.