Specifications

Connecting cables
1 Shut down your PowerBook and all SCSI devices in the chain.
2 Connect an Apple HDI-30 SCSI System Cable to your computer.
Attach the smaller end of the cable to your computer’s SCSI port (marked
with the icon
g
).
3 If necessary, connect a terminator to the system cable.
If you are attaching only one SCSI device, see the section “If You Are
Attaching One SCSI Device” in “Checking That the SCSI Chain Is Properly
Terminated.”
If you are attaching more than one SCSI device, see “If You Are Attaching
More Than One SCSI Device” in “Checking That the SCSI Chain Is Properly
Terminated.”
4 Connect the terminator or system cable to either port on the SCSI device.
5 To connect the next device, use a SCSI peripheral interface cable.
Both ends are the same. Attach one connector to the available SCSI port on
the first device, and the other connector to either SCSI port on the next
device.
WARNING When making SCSI connections, always turn off power to all
devices in the chain, including your computer. If you don’t you could
lose information and damage your equipment.
91
Using SCSI Devices