Specifications

Recharging two fully depleted batteries takes about two hours with the
computer shut down or in sleep, or about four hours if you are using the
computer.
While the computer is shut down and the power adapter is plugged in, you
may remove charged batteries from the computer and replace them with
batteries you want to charge.
Check to see if a battery is fully charged by looking at the Battery Monitor
module in the Control Strip.
Removing or replacing the batteries
To remove or replace the batteries, follow these steps.
1 Save your work, and then choose Shut Down or Sleep from the Special menu.
You can also plug in the power adapter if you want to keep the computer on
while you remove the batteries.
2 Close the display.
3 Open the door of the battery you want to remove by sliding the door in the direction
indicated by the arrow.
The door is physically attached to the battery.
66
Chapter 6