Specifications

2 Disconnect one Ethernet cable from the network device immediately to the left or right
side of the PowerBook.
3 Plug an Ethernet cable into the socket you have just freed and into the PowerBook’s
Ethernet adapter.
4 Plug the Ethernet cable you disconnected in step 2 into the remaining socket of the
PowerBook’s adapter.
5 Turn on EtherTalk in the Network control panel.
See the Macintosh Reference book for help using the Network control panel.
Connecting your PowerBook to the end of an Ethernet network
Connecting the PowerBook to the end of a network will not interrupt
communication among network users.
1 Plug the cable on your Apple Ethernet adapter into the Ethernet port on the PowerBook.
2 Use an Ethernet cable to connect the adapter to the network as shown.
3 Turn on EtherTalk in the Network control panel.
113
Using Your PowerBook With Ethernet