Instruction Manual

10 Remove the plastic NuBus card guide next to the floppy disk drive by pulling it
straight out.
The next four steps describe how to insert the card.
IMPORTANT Handle a NuBus card by its edges only, and be careful not to
touch the pins inside the connector.
11 Lower the card into the slot.
NuBus cards have all or most of their chips on one side. Hold the card so its
chips are facing up, and the connectors on the card and the slot are aligned.
You may need to tilt the card as you lower it into the slot.
Connector
NuBus card guide
34
Chapter 3