Instruction Manual

Installing networking system software

You use the Installer program and the system software disks that came with

your PowerBook Duo (or that you purchased as a separate system software

upgrade kit) to install networking software on your PowerBook.

The following instructions describe how to install the networking software

you need.

1Insert the PowerBook Duo into the dock.

2With the PowerBook turned off, insert the first system software disk into the internal

floppy disk drive.

3 Turn on your PowerBook Duo.

The Installer program opens automatically.

4Click OK.

You see the Easy Install dialog box. (If you have System 7.5, this dialog box

looks slightly different.)

Make sure that the hard disk indicated in the box is the one on which you

want to install networking software. If a different disk appears, click the

Switch Disk button until the correct disk name appears.

Depending on the version of your installation disks, you may see slightly

different information in this dialog box.

Chapter 2